Products > Crates & Boxes > Externally Cleated Box

Externally Cleated Box

Configure your Crates
Internal Dimensions in inches
Length
Width
Height
each
Price $
A Standard Cleated Box is a very versatile box able to accommodate a wide variety of uses.  Our Standard Cleated Box consists of 1/2 inch plywood walls supported by 2 x 4 cleating, a 2 inch deck and 4 x 4 runners.  The top is a 1/2 inch plywood top with 2 x 4 cleating to provide additional support. 
Specifications:
  • All boxes are ISPM 15 compliant and stamped for international shipping compliance
  • Standard Cleated Boxes are suitable for items up to 2500 pounds (contact us for product exceeding 2500 pounds)
  • Stacking limitations include 
    • 1000 lb+ limit to 2 high stacking
    • 500-999 lbs can be stacked 3 high
    • 1-499 lbs can be stacked 4 high
  • Standard Cleated Boxes will be delivered assembled, but with a loose top.  Top will be secured for transport only with banding or double headed nails.  Some nail removal or band removal may be required.  Purchaser is responsible for the securement and nails for final assembly.
  • Boxes with a height over 36" will be sent with one side loose for easier loading.  Will be secured for transport only with banding or double headed nails.  Some nail removal or band removal may be required.  Purchaser is responsible for the securement and nails for final assembly.
  • Wood is a naturally occurring product and some imperfections, knots and variation is to be expected.  Box dimensions can vary by up to 1/8 of an inch.
  • All product will be shipped within 7 working days of the order
  • The outside dimensions for a box will typically exceed the internal dimensions for the box by 4 inches on the length, 4 inches on the width and 7 inches on the height
Ordering:
All our boxes are ordered by the internal dimensions (ID) of the box.  In order to properly determine the internal dimensions required, measure the product to be packaged at the widest length, the widest width (at a 90 degree angle to the widest length), as well as the height from the bottom of the piece to the highest point.  It is customary to add at least an inch on each side of the product to allow for loading, small measurement errors and securement of the product (ie. If the product to be packaged was 36 inches long the ID of the box ordered would be 38 inches for that dimension).  A wood box provides a high level of protection, but any product to be shipped in a box should be secured with banding, strapping, dunnage or blocking to prevent shifting and product damage in transit.

LPO-201